Virgin Materials Continuous Peek Extrusion Sheet Round Rod,Peek Rod,Peek Tube,Polymer Peek,Peek Sheet,Polyetheretherketone Rod,Plastic White Peek Rod,Peek Parts

Product Description

Carbon Fiber Filled PEEK Rod with 500mm to 1000mm Length for Engineering

PEEK product group:

1. PEEK+Glass fiber
2. PEEK+Carbon fiber
3. Virgin PEEK
4. Food grade PEEK

Description:

Trade names:	Polyether etherketone, PEEK
Available Shapes:	Sheets, Rods, Tubes,Plates, Strip, Customized Parts
Color:	Natural
Sheets Thickness:	6mm ~ 50mm
Size:	610 x 1220mm, 1000 x 2000mm
Rods Diameter:	6.0mm ~ 150mm
Length:	500mm ~ 1000mm

About PEEK Rod & Sheet:

PEEK is a high performance engineering thermoplastic that offers chemical and water resistance similar to PPS, but can operate at higher temperatures. PEEK can be used continuously to 480°F (250°C) and in hot water or steam without permanent loss in physical properties. For hostile environments, PEEK is a high strength alternative to fluoropolymers. PEEK carries a V-0 flammability rating and exhibits very low smoke and toxic gas emission when exposed to flame.

Advantages:

- Excellent chemical resistance
- Very low moisture absorption
- Inherently good wear and abrasion resistance
- Unaffected by continuous exposure to hot water or steam
- High temperature resistant, can withstand 250°C

Key Features:

- Strong and stiff plastic
- Outstanding chemical resistance
- Good mechanical properties at elevated temperatures
- Resistant to hot water and steam
- Bearing grade PEEK has excellent wear characteristics
- UL 94 V-0 flammability rating (0.059" thickness)
- Very low smoke and toxic gas emissions when exposed to flame

Applications:

- Semiconductor machinery components
- Aerospace parts
- Seals
- Pump and valve components
- Bearings and bushings (bearing grade PEEK)
- Electrical components
- Medical instrument parts
- Food processing machinery components

 

PEEK Technical Data Sheet
Technical Data	Method of Verification	Unit	PEEK
I.Physical Properties
Density	ISO 1183	g/cm3	1.31
Water absorption	ISO 62	%	0.06
II.Mechanical Properties
Tensile strength at yield	ISO 527-2	MPa	97
Tensile strength (psi)	527	MPa	110/-
Tensile Modulus (psi)	527	MPA	4400
Flexural strength (psi)	527	MPa	110/-
Compressive strength (psi)	604	MPA	29/57
Coefficient oflinear expansion(23-100°C)		m/(m.k)	50×10-6
Thermal conductivity	C177	Btu-in/hr-ft2-°F	1.7
Tensile strength at break	ISO 527-2	Mpa	-
Elongation at break	ISO 527-2	%	25
Modulus of elasticity after tensile test	ISO 527-2	MPa	-
Modulus of elasticity after flexural test	ISO 178	MPa	4,200
Hardness-Rockwell	ISO 2039-2		-
Hardness - Shore D	DIN 53505		88
Charpy impact strength at 23 C	ISO 179	kJ/m2	N.B.
Friction coefficient	DIN 53375		0.34
III.Thermal Properties
Heat deflection temperature - HDT/A	ISO 75-2	C	152
Max. service temperature - Short term		C	300
Max. service temperature - Long term		C	260
Thermal conductivity at 23 C	DIN 11359	W/(K*m)	0.25
Coefficient of linear thermal expansion	ISO 11359	10 -4* K -1	0.47
IV.Electrical Properties
Dielectric constant at 1 MHz	IEC 60250	10 6 Hz	3.20
Dielectric loss factor at 1 MHz	IEC 60250	10 6 Hz	0.003
Volume resistively	IEC 60093	Ohm (Ω) * cm	≥10 16
Surface resisively	IEC 60093	Ohm (Ω)	≥10 15
Dielectric strength	IEC 60243-1	kV/mm	19
V.Miscellaneous Data
Flammability	UL 94	Class	V-0
NOTE: 1 g/cm3 = 1,000 kg/m3, 1 Mpa = 1 N/mm2, 1kV/mm = 1 MV/m
Statement:
NOTE: The information contained herein are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. ENERGETIC will not provide any legally binding guarantee of certain properties, or any suitability.