Engineering Mc Nylon Plastic Sheet, Nylon Bar, Nylon Blocks, Nylon Plastic Blocks
|
Still deciding? Get samples of $ !
Request Sample
|
Product Details
| Customization: | Available |
|---|---|
| Color: | Black, Red |
| Material: | PA6 |
Gold Member Since 2014
Suppliers with verified business licenses
Address
No. 601-11, Baolong factory building, No. 2 Baolong 4th Road, Baolong community, Baolong ...
International Commercial Terms(Incoterms)
FOB, CFR, CIF, DAP, FCA, EXW
Terms of Payment
T/T, PayPal, Western Union, Small-amount payment
Find Similar Products
Basic Info.
- Model NO.
- Energetic-MC nylon
- Kind
- Hard Plastic Sheet
- Water Absorption
- 3
- Contraction Percentage
- ＜0.4%
- Tensile Strength
- 90
- Size
- 1100X2200mm, 1000X2000mm
- Thickness
- 7-500mm
- Production Time
- 3~25 Days
- Packing
- Thick Carton Boxes
- Transport Package
- Customized
- Specification
- RoHS
- Trademark
- Energetic
- Origin
- China
- HS Code
- 3920920000
- Production Capacity
- 200 Ton/Month
Product Description
Polyamides/PA/Nylon Rod, Nylon Sheet
About Nylon:
The most common engineering nylons are PA6 and PA66. Nylon stock shapes are produced by either extrusion or casting. The process is in part a determinant of the nylon properties of the end product. Modifiers are added to enhance desirable characteristics.
Advantages:
Nylon Rod and Nylon Sheet are tough, durable, general purpose engineering material with special grades for specialty applications. Typical application conditions would be medium speed and temperature in a rugged, abrasive, impact and high load environment.
Disadvantages:
Poor dimension stability, electrical and mechanical properties, may become affected by absorbing moisture or water, acidproof ability not good, can't dye with acid or touch overmuch acid, weak lightfastness, low endurance in pollution
Key Features:
Applications:
| Trade names: | Polyamides, PA, Nylon |
| Available Shapes: | Sheets, Rods, Tubes, Plates, Parts |
| Color: | Natural White, Black, Green, Others |
| Sheets Thickness: | 7mm ~ 200mm |
| Size: | 1100 x 2200mm |
| Rods Diameter: | 20mm ~ 400mm |
| Length: | 1000mm ~ 6000mm |
About Nylon:
The most common engineering nylons are PA6 and PA66. Nylon stock shapes are produced by either extrusion or casting. The process is in part a determinant of the nylon properties of the end product. Modifiers are added to enhance desirable characteristics.
Advantages:
Nylon Rod and Nylon Sheet are tough, durable, general purpose engineering material with special grades for specialty applications. Typical application conditions would be medium speed and temperature in a rugged, abrasive, impact and high load environment.
Disadvantages:
Poor dimension stability, electrical and mechanical properties, may become affected by absorbing moisture or water, acidproof ability not good, can't dye with acid or touch overmuch acid, weak lightfastness, low endurance in pollution
Key Features:
- Excellent bearing properties
- High impact strength and toughness
- Low power factor requirements
- High wear resistance
- Very good sliding properties
Applications:
- High load bearings
- Wear pads
- Support and Guide wheels
- Conveyor and Tension rollers
- Wire rope sheaves
- Buffer pads
- Gears...
- Extruded Nylon 6 (PA 6) - natural (white) / black:
- MC Nylon 6 (PA 6) - natural (ivory) / black:
- MC Nylon 6 + oil filled (PA6 + oil) - green:
- Nylon 6 + MOS2 (PA6 + MoS²) - grey black:
- Nylon 6+ GF30 (PA 6-GF30) - black:
- Nylon 66: this material with a higher mechanical strength, stiffness, heat and wear resistance than extruded nylon 6. It also has a better creep resistance but its impact strength and mechanical damping ability are reduced. Well suited for machining on automatic lathes.
){kind=link}
Send your message to this supplier
People who viewed this also viewed
Find Similar Products By Category
- Supplier Homepage
- Products
- Engineering plastic material
- MC nylon sheet and rod
- Engineering Mc Nylon Plastic Sheet, Nylon Bar, Nylon Blocks, Nylon Plastic Blocks
Related Categories
Hot Searches
More